Renault immobiliser remote locking key bypass code program for clio scenic megan IR

Published by bargainspares on July 24th, 2011 - in News and Articles

So your renault wont start because the daft Infra Red key isn’t working the immobiliser. Well its probally half the key and half the sensor above the mirror. Water damage is very common from the sunroof leaking. But anyway fixing the damn french POS thing is your own job, here i’ll show you how you can bypass the immobiliser to get you started and running again.

Open your ignition key fob with a tiny screwdriver.
Next to the battery you will see two lines of letters and numbers.
Write them down.Usually 5-6 letters/numbers.

Next download this file RenaultImmCode
Run the program “RenaultImmCode.exe”
The password is Trantir.Enter the password.
It will then ask for your model.
Simply type in Megane Scenic or Clio etc.
It will then ask you for your code from your key fob. Enter the digits/letters from the fob
It will then generate your emergency immobiliser code.Please write it down and keep it safe!


Put key in the ignition.
Turn on – the immobiliser light flashes.
Press/Hold the central locking button.
Wait for the the light to slow down.
Let go.
Press and hold the CL count the flashes in sequence to your first if your first digit is 5,then count 5 flashes and then release the CL button.
Immediately press the CL in again and count the flashes for your next digit.Repeat for 3 and 4.Make sure you count exactly otherwise you will have to start all over again.
When you have completed all 4 digits,the immobiliser light will remain constant.
Now you can start your cars engine.

One Response

  1. Marcel says:

    Sweet write, trendy website layout, maintain the good work